easyRAID S4-FWTT, User Manual

Page: 74 / 75

User’s Manual
-D-2-
3. Launch HyperTerminal from the
desktop of the host computer ( Start >
Programs > Accessories >
Communications > HyperTerminal ).
4. The Connection Description dialog
box will appear (if this is the first time
you have run HyperTerminal, you will
first be prompted to enter information
about your location). Enter a name to
identify the connection (e.g. ) and
select an icon to represent the
connection. Press
OK .
5. The Connect to dialog box appears.
Select COM1 or COM2 from the
Connect using: dropdown menu,
depending on which port is linked to .
Click
OK .
6. The COM Properties dialog box will
appear. Set the following values:
Bits per second: 19,200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Xon/Xoff
7. Click OK . The HyperTerminal
connection to is now established.
19200