easyRAID S4-FWTT, User Manual

Page: 40 / 75

User’s Manual
-4-4-
Setting RAID 0
1. Ensure is turned off
2. Move both selector switches 1 and 2 to
ON as shown.
Setting RAID 0+1
1. Ensure is turned off.
2. Move selector switch 1 to
ON and 2 to
OFF as shown
Setting RAID 5
1. Ensure is turned off .
2. Move both selector switch 1 and 2 to
OFF.
Setting RAID 5+spare
1. Ensure is turned off.
2. Move selector switch 1 to
OFF and 2 to
ON .
Initially, in a RAID 5+spare array, the drive in the TOP drive carrier is
the hot spare and its status indicator will be shown amber for
notification.
In a RAID 0+1 array, disk 1 , 2 and disk 3 , 4 are two independent RAID
1group . This allows one disk from each separate R1 group to fail
simultaneously.