800-448-3873 • Grant, Michigan
www.easypropondproducts.com • [email protected]
1-13
Limited Warranty:
The LED4WW has a limited warranty against any mechanical or material defects for a period of two years from
the date of purchase. LED4WW fixtures must be installed on a magnetic 12v AC low voltage system. EPT45
transformer has a limited warranty for any mechanical or material defects for a period of three years from the date
of purchase. Limited warranty only covers properly installed and maintained units.
The limited warranty does not cover normal wear and tear, nor any deterioration suffered through overloading,
improper use, negligence or accident. Similarly, any modification made by the purchaser to the product will cause
the warranty to be null and void. All returned items will be inspected to determine cause of failure before warranty
is approved. Limited warranty does not cover any cost associated with the installation or removal of the product
subject to warranty claim. An RA number must be obtained by calling EasyPro Pond Products at 800-448-3873.
It is your responsibility to pay the return shipping charges. Be sure to include the RA number, original receipt (in the
form of an invoice or sales receipt), name, return address and phone number inside of the package. No warranty
claims will be honored without the original receipt. Ensure the product is properly packaged and insured for the
replacement value. Damage due to improper packaging is the responsibility of the sender.
The manufacturer or supplier shall not be held liable for any damages caused by defective components or materials
of this product; or for loss incurred because of the interruption of service; or any consequential/incidental damages
and expenses arising from the production, sale, use or misuse of this product. The manufacturer or supplier shall
not be held liable for any loss of fish, plants or any other livestock as a result of any failure or defect of this product.
Installing the transformer:
1
This product may be installed indoor or outdoor. Avoid placement in areas of direct water contact. DO NOT
SUBMERSE THIS DEVICE IN WATER.
2
Place transformer where built-in photo eye is not blocked. Select from four settings on back of device for Auto,
dusk to dawn, or on at dusk and off after 4, 6, or 8 hours .
3
Use correct voltage in accordance with the nameplate information. Maximum output of 45 watts; do not over load
transformer.
4
Secure the unit using the integrated screw mount slot.
Installation for LED Lights:
1
Disconnect power before installing the lights.
2
Assemble optional base to fixture with bolt/nut provided. Some applications may not require base.
3
Place the light in the desired location of your water feature or landscape.
4
Adjust the angle of the light by the bolt on the side of light.
5
Ballast the base with rock or other suitable item to keep light fixture in place.
6
Run the cable back to the transformer. Connect leads to transformer.
7
Each LED4WW uses 3 watts, size transformer appropriately.
8
Plug in transformer and enjoy.
