background image

Warranty:

This product is warrantied against any mechanical or material defects for a period of one year from the 

date of purchase. Warranty only covers properly installed and maintained units.
The warranty does not cover normal wear and tear, nor any deterioration suffered through overloading, 

improper use, negligence or accident. Similarly, any modification made by the purchaser to the prod-

uct will cause the warranty to be null and void. 
All returned items will be inspected to determine cause of failure before warranty is approved.
Warranty does not cover any cost associated with the installation or removal of the product subject to 

warranty claim.
An RA number must be obtained by calling EasyPro Pond Products at 800-448-3873. It is your re-

sponsibility to pay the return shipping charges. Be sure to include the RA number, original receipt (in 

the form of an invoice or sales receipt), name, return address and phone number inside of the pack-

age. No warranty claims will be honored without the original receipt.
Ensure the product is properly packaged and insured for the replacement value. Damage due to im-

proper packaging is the responsibility of the sender. 
The manufacturer or supplier shall not be held liable for any damages caused by defective compo-

nents or materials of this product; or for loss incurred because of the interruption of service; or any 

consequential/incidental damages and expenses arising from the production, sale, use or misuse of 

this product.  
The manufacturer or supplier shall not be held liable for any loss of fish, plants or any other livestock 

as a result of any failure or defect of this product.

800-448-3873 • Grant, Michigan

www.easypropondproducts.com • [email protected]

1-14

Summary of Contents for ECF10









Reviews: