6
4.
Lift the Roller up by turning the handle anti-clockwise, Feed the film directly over the top laminating roller and
through to the back of the system.
5.
Move towards the
rear of the system a
pull the laminate tight
from the middle tow
the back of the syst
and lower the lamina
roller by turning the
handle clockwise
anti - clockwise.
5. Move towards the
rear of the system
and pull the laminate
tight from the middle
towards you, while
holding lower the
laminating roller by
turning the handle
clockwise. When the
two rollers meet the
handle will go loose,
using one finger flick
the handle clockwise.
Using too much
pressure can cause a
wave in the middle of
the laminate.
6. Cut through just the backing paper using the snitty [cutting tool] provided. Once cut, loosen the backing
all the way along the film, pull down from the middle and drape over the feed table.
