3
Safety Instructions
•
Please ensure that the voltages of power supply you are using match with rated
working voltages before operating the machine
•
The power supply should be close to the machine for convenient use
•
The power supply should provide reliable protective earthing connection
•
This machine must be earthed reliably to ensure the safety of the machine during
operation
•
Only the operators of this machine should operate the electric or motion
components/controls
•
Please don’t use damaged wires or sockets
•
Please keep children away from touching and operating this machine
•
Please do not spray water or other liquid on the machine otherwise electric shock
or machine faults could occur
•
Please do not replace power cord or plugs yourself, do not put heavy objects on
the power lines as this may cause electric shocks
•
During use please take care that no clothes, neckties, hair, necklaces etc are near
the machine otherwise injuries could occur
•
Please don’t put burrs, sharp blades or over thick rigid materials into the two
rubber covered rollers (for example, tools, rulers and knives etc.)
•
Don’t cut adhesive films directly on the surfaces of the rubber covered rollers to
avoid damage
•
Please shut down this machine after laminating to avoid misuse of the machine
•
At the end of the working day always lift the rollers to ensure no flat spots or
distortions occur
•
When you need to move this machine, please shut down the power switch and
pull out the plugs
•
Please be aware of the location of the wheels during moving or operating this
machine to avoid foot injuries
•
Always ensure the machine is positioned on a flat and level floor
•
Please shut off the power supply (pull out the power plug) when the machine isn’t
going to be used for long periods of time.
Environmental Requirements
•
Ambient temperature 10°C - 40°C, humidity 30% - 80%, Ideal humidity 55%
•
Dust - Due to the static adherence of the film, you should keep the environment clean, a
dust cover is provided with the machine
•
Please do not keep the machine in direct sunlight
•
Please do not keep the machine in or around dusty areas
•
Enough space should be kept around the machine to ensure the secure and effective
application. The minimum holding areas are 2.5m x 3m
