14
Pull the laminate from the back of
the machine in the centre of the
laminate with one hand while pushing the lever to lower the
roller with the other hand.
Please ensure you do not put too much pressure on the roller.
For general lamination and board mounting set the pressure
control to zero.
Please note: When mounting board, insert into rollers bring
rollers down and press the lock button. This will illuminate, the
rollers are now set to the required gap and will not move until
The pressure control lever is pushed to lift the rollers.
Once film is held in place separate the backing paper
from the film using the safety knife provided.
Select foot pedal mode and select a slow speed, then
press the foot pedal and inch the laminate through the
rollers until the cut backing paper faces you.