17
Running A Control Solution Test
You need the meter, a test strip, and control solution.
1.
Put a test strip into the meter in
the direction of the arrow. The
meter will automatically turn on.
2.
Place the meter on a flat
surface, like a table.
3
.
Remove the control solution
bottle cap and wipe the tip of
the bottle with a tissue.
4.
Squeeze the bottle until a tiny drop
forms at the tip of the bottle.
Touch the drop to the Blood collection
area at the end of the test strip
.
Do not put control solution on top of
the test strip.
When you hear the beeper, you have
enough control solution in the test strip.
The meter starts to count down from 5
seconds and will show the results.