• Protect electrical parts against moisture. Do not immerse in water or other liquids during cleaning or operation to avoid
electric shock. Never hold the appliance under running water.
• A fire can occur if the appliance is not handled with care.
• Caution when using the device near combustible materials. Do not point to the same location for an extended period
of time.
• Do not use in the presence of an explosive atmosphere.
• After use, place the appliance on the stand and allow it to cool down before it is packed away.
• Do not leave the appliance unattended while it is in operation.
• Caution is advised when using long extension cables.
• Do not use the appliance under moist circumstances.
• The metal nozzel. Watch out and do not touch the metal nozzel.
• Prevent damage of the heating element. Do not block the nozzel.
• Do not leave the appliance when switched on.
• Do not use this device in rain or damp surroundings, or near explosive or flammable products.
• Do not use the device on or near very dry spots to avoid fire.
• Always remove the plug from the socket when not using the device, when replacing the nozzles or during
maintenance of the device.
• Do not point the device at the same place for longer than 10 seconds at a time and allow area to cool between use
• Do not hold the device too close to the surface and keep at least 5cm distance
• Pay attention to the direct / indirect workspace as the heat can ignite flammable materials, which are close by but not
necessarily in view.
• Do not allow the hot parts of the device to touch the cord or other flammable materials.
• The device should always be clean, dry and free of grease and oil.
• Do not use the appliance for purposes other than for which it is intended.
• Never run while holding the unit in your hands.
• Always keep the cable to the rear, away from the unit itself.
When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric
shock and personal injury. Read all these instructions before attempting to operate this product
and save these instructions.
There is a risk of fire if the appliance is not used with care, so please take note of the
following:
•
Please be cautious with the device when you are near flammable materials.
•
Never leave the appliance unattended when it is switched on.
How the weed burner works:
This innovative weed burner works by transmitting bursts of thermal heat which result in the plant cells dying
from root to tip, without the use of dangerous flames.
Get to know your weed burner:
1
2
3
4
5
6
7
8
0-Off
I-Setting One 50 °C (Venting/ Cooling)
II -Setting Two 600 °C
Hot Air Nozzle
Stand
Air Vent
Connector
Middle Pole
Top Handle
Cord Retainer
Installation
What is in the pack:
1 X Weed Burner Nozzle
1 X Weed Burner Main Body
1 X Middle Pole
1 X Top Handle