EasyIO EIO-55 Series, Product Manual

Page: 17 / 17

EIO
-55
16
40123 Humidity Sensor Calibration REAL -10.0..+10.0 °F
40124 Humidity Display Unsigned 0 = Disabled
1 = Enabled (default)
40125 Cleaning Mode Time Unsigned 0..480 minutes (Default 0)
40126 Boost Mode Time Unsigned 0..480 minutes (Default 0)
40127 Backlight Unsigned 0..20 (default 5)
40128 Relay Control Mode Unsigned 0 = Normally Open (Default)
1 = Normally Closed
40129 Lock Mode Password Unsigned 0000...9999 (Default 0000)
40130 Maintenance Mode Password Unsigned 0000...9999 (Default 6666)
40134 Enable Holiday Symbol Unsigned 0 = Disabled
1 = Enabled (Default)
40135 Holiday Mode Target Unsigned 0 = OFF/Frost Mode (Default)
1 = ECO Mode
40137 Staff Access Code Unsigned 0000...9999
40138
Language Unsigned 0 = English
1 = Finnish
2 = Swedish
40139 Zone 1 Text (Room Sensor Unsigned 1 = Room (Default)
Description) 2 = Floor
3 = Outside
4 = Zone 1
5 = Zone 2
6 = Zone 3
7 = Bathroom
8 = Sauna
9 = Bedroom
10 = Kitchen
11 = Cooler
12 = Flow
13 = Hot Water
14 = Tank
15 = Pool
40140 Zone 2 Text (Floor Sensor Unsigned 0 = Disabled
Description) 1 = Room
Default: 2 = Floor 2 = Floor
Note: Disabled removes the text 3 = Outside
and the Floor measurement from 4 = Zone 1
the display. 5 = Zone 2
40141
Zone 3 Text (Outside / Network Unsigned
6 = Zone 3
7 = Bathroom
Sensor Description)
8 = Sauna
Default: 3 = Outside
9 = Bedroom
10 = Kitchen
11 = Cooler
12 = Flow
13 = Hot Water
14 = Tank
15 = Pool
40142
Outside Temperature Source Unsigned 0 = Internal Sensor (Default)
1 = Network Temperature
40300 MAC Address Unsigned 0..127 (Default 1)
40301 BACnet Baud Rate Unsigned 0 = 9600 (Default)
1 = 19200
2 = 38400
3 = 57600
4 = 76800
40400 Force Reset Unsigned 0 = Normal (Default)
1 = Force Reset
40401
Non Volatile Memory Update Unsigned 0 = Normal
1 = Update
40403 Force Factory Defaults Unsigned 0 = Normal (Default)
1 = Force Factory Defaults