EDC212S
Address: Room 402, Building B, Hangcheng Industrial Zone, Chentian, Xixiang Street, Baoan District, Shenzhen
Phone: 0755-27788421
Website: http://www.easydetek.com
Shenzhen EasyDetek Technology Co.,Ltd
- 11 -
interfere with the normal radiation of the antenna, causing false alarms or changing the sensing range;
8. If the microwave sensor and wireless communication module (NB, Bluetooth, WIFI, 2.4G module) coexist in application,
the distance between the antenna of the Internet of Things module and the antenna of the microwave module should be
increased in space. At the same time, try to shield or not receive the trigger signal of the microwave module when the
Internet of Things module is communicating; microwave sensors or products with built-in microwave sensors will be
interfered by wireless routers. It is recommended to keep 1m away from high-power wireless communication equipment
such as routers and wireless hotspots during installation. Above spacing
9. The light sensor threshold is the test value in a sunny environment, no shadows, and ambient light diffuse reflection
conditions. The wavelength of light sensing detection light covers 400nm~1100nm (including visible light, LED tube,
infrared light band), the illuminance value detected by light sensing may be different at different time periods and under
different weather conditions;
10. The antenna surface of the microwave sensor should be avoided facing the AC drive power supply, and at the same
time as far away as possible from the rectifier bridge, transformer, switch tube and other high-power devices of the drive
power supply, so as to prevent the power frequency signal from interfering with the microwave module and causing false
alarms;
11. In the actual application environment of the electromagnetic wave emitted by the microwave sensor, the different
reflectivity of the obstacle will bring about the different sensing range, which is a normal phenomenon;
12. Product specifications and parameters may be upgraded without prior notice.
Product naming rules
ED
ED
Frequency band
C
Product Category
2
Product
number
12
Antenna type
S
Characteristic
-
Delay time
5Y
Customer
Number
-
Configuration
1
S 3GHz
F 6GHz
C 5.8GHz
Q 24GHz
V 60GHz
W 77GHz
1 Microwave
sensor
2 Microwave
sensor switch
3 radar antenna
4 MCU
5 Microwave
power supply
6 IC
7 other
8 networking
S Onboard
antenna
D Stacked
antenna
H high
precision
antenna
C Ceramic
antenna
M Needle
antenna
Y has
photosensitive
No
photosensitive
P
programmable
