Switching ON/OFF/selecting a level
USA
AFTER SALES SUPPORT
14
USA
1 866 588 8096
Volumizing Hot Air Brush
Switching ON/OFF/selecting a level
− If the temperature is too high due to a blocked air inlet or outlet
opening, the brush will automatically switch itself OFF.
You must wait until the brush has cooled down before
switching it ON again.
− Make sure the brush attachment is securely fitted before
switching ON the brush.
− For optimal results, shampoo and condition your hair prior to
using the brush.
− When the brush is switched ON, the IONIC indicator light
5
will
be illuminated.
1. Connect the
ALCI plug
6
to a wall outlet.
2. Slide the level switch
4
to a desired position.
Slide to position “2” for a high air-flow with heat.
Slide to position “1” for a reduced air-flow with heat.
Slide to position “0” to switch the brush OFF.
Using the brush attachment
The brush comes with a large round brush, a small round brush and a half brush.
The brush attachment may become very hot when in use. Only
touch the handle
9
during operation.
Attaching the brush attachment
1. Insert the desired brush (
1
/
10
/
11
) into the top of the handle
9
(see step 1 in
fig. B). Make sure the slots on the brush have been fitted onto
the tabs on the handle.
2. Slightly twist the brush to the left until you hear it click into place
(see step 2 in
fig. B).
You have successfully fitted the brush.
Detaching the brush attachment
1. Press the release button
2
on the side of the handle (see step 1 in
fig. C).
2. Slightly twist the brush to the right. Pull the brush out from the handle
(see step 2 in
fig. C).
You have successfully removed the brush.
For
review
R2