Air Circulator Fan
General Information
4 AFTER SALES SUPPORT
888-367-7373
GENERAL INFORMATION
When using the Air Circulator Fan, basic safety precautions should be observed.
PLEASE READ AND SAVE ALL INSTRUCTIONS BEFORE USING THE AIR
CIRCULATOR FAN.
1.
Always turn the fan off before removing the plug from the outlet.
2.
Always turn the fan off and unplug it immediately after using and before
cleaning.
3.
To protect against electrical hazards, do not place the fan in water or other
liquids.
4.
Do not allow the fan to become wet or damp.
5.
Do not store the fan where it can fall into water or other liquids.
6.
Do not store the fan unattended when it is plugged in. Turn the fan off when
leaving the fan for an extended period.
7.
Use the fan only for its intended use as described in these operating
instructions.
8.
Do not operate any appliance if its cord or plug is damaged, after the appliance
has malfunctioned, or after it has been dropped or damaged in any way.
Always follow the warranty instructions.
9.
Place fan on a dry flat, level surface to avoid it overturning.
10.
Avoid contact with moving parts.
11.
Never drop or insert any object into any opening. Do not insert any objects
into the area protected by the guards.
12.
Do not obstruct the airflow.
13.
Do not operate the fan without the guard.
14.
Close supervision is necessary when any appliance is operated near children.
15.
To maintain operating efficiency, user should not operate this fan 24 hours a
day, seven days a week.
16.
Do not run the cord under carpeting or cover with throw rugs, runners or
similar coverings, or under furniture or appliances. Arrange cord away from
traffic areas where it will not be tripped over.
17.
This fan employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the fan from the
outlet. Replace the fuse (see instructions next page) and check the fan. If the
replacement fuse blows, a short circuit may be present and you should contact
customer service for instructions.
18.
Warning! To reduce the risk of fire or electrical shock, do not use this fan with
any solid-state speed control device.
SAVE ALL INSTRUCTIONS
