Troubleshooting
The intensity is not felt or
a very weak intensity level
Pads are not attached to the
body firmly
The transparent films are still
stuck to the pads
Attach both pads firmly to the skin
Peel off film on the adhesive surface
of pads
The pads stack together or
overlap
Do not stack pads together or
overlap pads
The intensity setting is getting
weak
Increase the intensity level
The battery capacity is low
Change the battery
The skin turns red or the
skin feels irritated
The adhesive surface of the pads
is dirty or dry
Wash adhesive surface of pads gently
with your fingertips for about 3
seconds under slow running water
The therapy time is too long,
or the intensity is set too high
Reduce the application time or
reduce the intensity
The electrode pad surface if
worm out
Replace electrode pad
PROBLEM
POSSIBLE CAUSE
SOLUTION
Please use a wet cloth to clean the device first, and then use a dry cloth to wipe it again. The electrode pads
coming with the device are disposable and should be replaced when their adhesiveness becomes worse.
Contact the seller for replacements. Do not let the sticky side of the pads touch anything, including greasy
fingertips.
Cleaning and Maintenance
PROGRAM NAME
Mode 1: Massage
62.5
100~240
1
500
62.5
100~240
Mode 2: Beat
Mode 3: Knead
FREQUENCY (Hz)
PULSE WIDTH (μs)
Product Programs
We are so confident that you will love this product that we offer a 1 years Hassle Free Money back or
PRODUCT REPLACEMENT Guarantee.
Warranty
(1). Tens unit controller * 1pc
(2). Output wire * 2pcs
(3). Gel pads * 4pcs
(4). Manual * 1pc
(5). 4 AAA 6DC batteries
Product Specifications
NOTE: Not intended to be sterilized.
Not for use in an OXYGEN RICH ENVIRONMENT
Technical Information
Waveform and
wave shape
Biphasic rectangular
wave pulse
Degree of protection
against electric shock
Type BF applied part
Pulse duration
100-500us
(Microseconds)
Type of protection
against electric
shock
Internally powered
equipment
(Not applicable)
Pulse frequency
1-62.5Hz (Hz=vibration
per second)
Output Voltage
Max. 17Vpp ±20%
(at 500ohm load)
Power supply
4 AAA batteries
Automatic shutoff
20 minutes
Model/type
EHE010
Weight
4.87 oz
Lifetime for electrode
Storage for 2 years
(no use) , Times of
reusable: 30 times
Treatment time
20, 40, 60 minutes
Output intensity
0 to 10 levels,
adjustable
Mode of operation
Continuous operation
Modes
3 auto modes
Software version
A0
18
19
