Cleaning
20
NOTICE!
Risk of short circuit!
Water or other liquids that have penetrated the housing may
cause a short circuit.
− Make sure that no water or other liquids penetrate the
housing.
− Never immerse the product in water or other liquids.
NOTICE!
Risk of damage!
Improper handling of the product may result in damage to the
product.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, or sharp or metallic cleaning utensils such
as knives, hard scrapers and the like. They could damage
the surfaces.
All parts should be regularly cleaned, especially when you
notice a decrease in suction power.
Cleaning the crevice nozzle and upholstery brush
− Clean the crevice nozzle
20
and upholstery brush
21
with a damp cloth.
Then dry all parts thoroughly.
− If necessary, clean them under running water. Then dry all parts thoroughly.
Cleaning the handheld vacuum
1. Make sure the handheld vacuum
12
is switched off and removed from
the holder
2
of the floor vacuum
1
(see chapter “Using the handheld
vacuum”).
2. Press the unlock button
19
and then remove the dust container
16
from
the handheld vacuum by pulling it forward (see step 1 in
Fig. H
).
3. Remove the dust filter
37
and the coarse filter
36
from the dust container
(see step 2 in
Fig. H
).