EASYair ECE10 Series, Instructions For Installation, Use And Maintenance Manual

Page: 12 / 52

12
device should also be located so that it can be easily used by the operator
at any time�
Turn the mains switch, to which the power supply plug will be connected,
to position 0 (zero). Have the socket cable section checked by qualified
staff to make sure it suits the power absorbed by the device�
Loosen the screws that fix the left side of the oven and remove it ( Fig.6 )�
The flexible cable must be in polychloroprene or equivalent oil-resistant
synthetic elastomer sub-sheath� Use a cable with section suitable to the
load corresponding to every appliance, as indicated in the table ( tab. 1 )�
Insert the power cord into the hole of the cable gland located on the left
rear of the oven�
Fig. 6
ELECT. Model
EME523..
ECE5232
ECE5232S
EME523..X
ECE5232X
ECE5232XS
EME5..
ECE52
ECE52S
EME5...X
ECE52X
ECE52XS
EME7..
ECE72
ECE72S
EME7...X
ECE72X
ECE72XS
EME10..
ECE102
ECE102S
EME10...X
ECE102X
ECE102XS
Weight 53 53 75 75 105 105 110 110
Voltage 1N 230V 3N 400V 3N 400V 3N 400V 3N 400V 3N 400V 3N 400V 3N 400V
Frequency (Hz) 50/60 50/60 50/60 50/60 50/60 50/60 50/60 50/60
Absorbed power (kW) 3.3 4.8 6.3 7.7 9.6 12.6 12.6 17.3
Minimum power cable
section (mm
2
)
3 x 1.5 5 x 1.5 5 x 1.5 5 x 1.5 5 x 1.5 5 x 2.5 5 x 2.5 5 x 4
tab. 1