32
1. Call Mode:
Select Call Mode: Line1, Line2, IP Dial.
2. Matching Number:
Match the user’s input, there are 3 ways:
Mode 1: Match character strings. E.g.: “010*/11” means matching the numbers that
begin with “010” and length is 11. Here, “*” means matching 0-n digits.
“010xxxxxxx8/11” means matching the numbers that begin with “010”, end is “8”
and length is 11.
Mode 2: Match character strings fully. E.g.: “01058092777/11” means matching
the right number. When you dial this number, you do not need to dial “#” or
“RD/BACK” and the number will be sent immediately.
Mode 3: Set none. It is used by IP dial.
3. URI:
The URI will save the URI of called party (E.g.:
[email protected]:5060
) if you
select IP dial. You can set dialing shortcut key according to this dial rule. In this
way, you can input dialing shortcut key to realize IP dial.
4. Dial Prefix:
The dial prefix will be added in the front of the outgoing number if the number
matches shortcut key or dial rule.
5. Dial Cut Digits:
The outgoing numbers will be cut in the front of the numbers according to the Dial
Cut Digits.
6. Name:
Name for Dial Rule, it is good for memory.
7. Shortcut Key:
You can set dialing shortcut key for Mode 2 and Mode 3. And then you could input
dialing shortcut key instead of inputting the numbers or IP address to make a call.
You should not set dialing shortcut key for Mode 1.
Other Settings
1. Hotline
If fill in this, it will Dial the number automatically when Hook Off.
