17
1.
Device Mode
The way of Data packages from LAN Port to WAN Port.
There are three ways for Retransmits Mode: NAT, Bridge and disable.
NAT Mode: retransmit by NAT
Bridge Mode: retransmit by SWITCH.
Disable: not retransmit.
2.
LAN IP and LAN Subnet Mask
It is efficient if you select “NAT” for Retransmits Mode. You should set LAN IP
and LAN Subnet Mask, generally specking, you can use the default values.
You should select “NAT” or “Bridge” Mode if you connect your PC with
GIP300/GIP300P IP Phone’s LAN.
It is suggested that you should use “NAT” Mode. Your PC’s Gateway IP
address is the same to GIP300/GIP300P IP Phone’s LAN IP address and your
PC’s IP address is the same to the network segment of GIP300/GIP300P IP
Phone’s LAN. (As the above page, your PC’s IP address should set
192.168.1.xxx), now your PC can connect to Internet. Probably, you can also
use DHCP Server expediently. You can see the DHCP Server introductions in
the following chapter.
DMZ settings:
DMZ is a kind of Network function. You can set it if you are familiar with
Network and need to use it, otherwise you can set “Enable DMZ” disable namely.
