EasyTravel Elite – ET1E
– Service Manual
Rev. 0404
14
3.7 Control
Cable
Kit number E0-00-1-054
Tools:
Phillips #2 Screwdriver
1. Open Control Panel Cover, see instruc-
tion 3.1
2. Open Controller Cover, see instruction
3.3
3. Disconnect Control Cable from Control
Panel (3-C) and Interface Circuit Board
(9-A)
4. Remove Control Cable
5. Insert new Control Cable (if needed, re-
move the Paint Protector and replace it
with a new one after the Control Cable is
inserted, see instruction 3.32)
6. Connect Control Cable to Control Panel
and Interface Circuit Board
7. Reassemble Controller Cover and Con-
trol Panel Cover, see instructions 3.1
and 3.4
8. Check all Control Panel and Controller
functions: drive, brake, speed and indi-
cation
