EasyTravel Elite – ET1E
– Service Manual
Rev. 0404
20
3.12 Protector Roller Kit
Kit Number E0-00-1-081
Tools:
Allen Key 5 mm
Loctite Adhesive # 242 (1312)
1. Open Cap Nut (16-A), remove Threaded
Rod (16-B) and Roller (16-C)
2. Place the new Roller (16-C) between the
two Plates (16-D) and align with holes
3. Insert Threaded Rod (16-B) though the
holes and Roller and right hand Plate
4. Apply a drop of Loctite to the Cap Nut
(16-A) and screw it onto the Rod (16-B);
avoid excess spill of Loctite which may
lock the Roller
5. Ensure that the assembly is not over-
tightened and that the Roller can rotate
freely
Figure 16
