5 -
Power Management
Reliable power management, wide voltage: +8V~+32VDC; The power input is protected against short
positive transient (1500 watts peak pulse power capability with a 10x1000 us waveform); The power input is
protected against negative voltage. Applicable for vehicles with +12V or +24V battery.
The recorder provides each camera with 12V DC power; DVR can detect the short cut on power
circuit.
Can use ignition to control the power.
DVR can monitor battery voltage after Ignition off, and auto into sleep mode when voltage is bellow specified
level.
Recording mode
Continuous record.
Support schedule recording.
Support alarm recording.
Speed and Vehicle status recording
Record vehicle speed and car id with audio and video.
Support 5 sensors, can be connected to speed, ignition, brake, return, right turn, left turn light etc.
Over-speed alarm and trigger recording with separated files
G-Sensor
X, Y, Z axis accelerometer
Recorded G-Sensor Values can provide reference of data analyzing when accidence happened
Combined Recording can be triggered when G-Sensor values go beyond threshold
SD card
Support SDHC card within 32GByte.
Support SDXC card more than 64GByte (Maxim 2048GByte)
Support hot-plug when the DVR system is not recording or remote-operation(remote copying or playing
back)
Note: If you remove the SD card while recording or operating (remote copying or playing back), it
might cause the damage of the files on SD card. While recording, the yellow light on the front panel
will be on. So please stop recording or operating until the yellow light is off if you need to remove
the SD card.
Multiple player supported
You may use manufacturer’s PC Playback Software or any of the following third party media player to play back the
record file.
VLC media player (version1.0.0 or above);
Storm player (Version 2009 or above);
Winamp (Version 5.531 or above).
