31 -
When the users who need “Power OFF Delay” function, the positive level of the DVR and the
ground should be connected directly (through the fuse) to the cathode and anode of the car battery,
at the same time attach car ignition signal line to the ACC of the car.
Of course, the time of “Power OFF Delay” cannot be set too long, because after the engine
shutdown, mobile DVR entirely depend on the power of the car battery to work, we should prevent
the vehicle can’t start correctly next time if the mobile DVR drained the energy of the car battery.
15. Q: What does the indicator light mean on the wire control L25?
A: The indicator light on the wire control is double color light, red and green. See the following
form for their state.
State of
green light
meaning
State of
green light
meaning
One slow flash
every three
seconds
System start
Slow flash every
three seconds
Communication of
wire control is not
normal
One flash every
second
System is normal
but no record
One flash every
second
No memory device
lighting
System recording
normal
lighting
No definition
One flash every 0.5
seconds
No definition
One flash every 0.5
seconds
System alarm
indicator (the
same as buzzer
）
Appendix 1:
