15
RECHARGEABLE ROBOT VACUUM
8. Driving wheel
9. Dust bin
10. Right rear wheel
11. Spinning side brush
12. Intelligent sensor
C. Flank
13. Charging port
INSTALLATION INSTRUCTION
Check the robot before using:
1.Check if the dust bin is full and the accessories are properly installed,
2.Check if the front and rear wheels, left and right spinning side brushes and
soft rubber brushes are blocked by dust, hair or other objects.
3.If there is too much dust attached inside and outside the suction inlet of the
dust bin, then shut down the robot and clean the dust bin. Please assure that
the dust filter is installed in the dust bin correctly after being cleaned.
4.Check the duster cloth is stalled neatly without misplaced; otherwise, the
movement of the left and right rear wheel will be affected.
Installation and Removal Methods of the spinning side Brush
* The spinning side brushes of this robot can be installed/removed by hand
without using tools!
Complete the installation by pressing the spinning side brushes directly into
the central convex shaft of the brush base.
Installation and Removal Methods of the Soft Rubber Brush
*The soft rubber brush of this robot can be installed/removed by hand without
