http://www.e2a.net
Easy2Access A/S Easy-809 EU G2 Fingerprint lock
7
unlocking mode. If the red LED flashes three times, the setting fails.
Automatic Locking Mode (ALM) & Temporary Unlocking Mode (TUM) setting
1.
Set
TUM
Enter
#1 (green LED flashes one time) + Administrator PIN code + #
(red LED flashes one
time
and green LED flashes three times)
+ 1
. When the green LED turns on and one long beep is
heard, the lock is TUM mode.
2.
Set ALM
Enter
#1 (green LED flashes one time) + Administrator PIN code + #
(red LED flashes one
time
and green LED flashes three times)
+ 0
. When the green LED turns on and one long beep is
heard, the lock is TUM mode.
Notes:
1). TUM or ALM is effective no matter fingerprint or PIN code is used to unlock the door.
2). The system default mode is ALM.
Anti Malicious Use Function Setting
1.
To arm the Anti Malicious Use function
Enter
#2 + Administrator PIN code + #
(red LED flashes one time
and green LED flashes three
times)
+ 1
. When the green LED turns on and one long beep is heard, the Anti Malicious Function
is armed.
2.
To disarm the Anti Malicious User function
Enter
#2 + Administrator PIN code + #
(red LED flashes one time
and green LED flashes three
times)
+ 0
. When the green LED turns on and one long beep is heard, the Anti Malicious Function
is disarmed.
Note:
1) When the Anti Malicious User function is armed, the lock will enter the temporary dead
condition if there have 5 continuous opening attempts with fingerprints or PIN codes
happening to the lock.
2) Under this condition, the lock is completely dead no matter any button is entered at the
outside unit.
3) This condition will last 3 minutes once it starts.
