To order parts and supplies: 800.343.9353 >> eastwood.com
9
BREAKING OFF BURNED
TIPS ON TUNGSTEN
• Place the burned end of the tungsten
into the proper width slot and quickly
move the tungsten to the side to snap
it off
(FIG 4)
.
FIG. 4
INJURY HAZARD!
Always turn off Power Switch and
unplug tool from electrical supply
when breaking off tungsten tips
to prevent pieces of tungsten
from falling into and being ejected
from cutting area and potential
severe injury.
FLIPPING AND
REPLACING DIAMOND
GRINDING WHEEL
• Using a 3mm Hex Key (not included),
loosen the four Retaining Set-Screws
(FIG 5)
.
• Remove the Grinding Head and set it
aside
(FIG 6)
.
INJURY HAZARD!
Always turn off Power Switch and
unplug tool from electrical supply
when flipping or changing Grinding
Wheels to prevent accidental tool
starting and potential severe injury.
INJURY HAZARD!
DO NOT attempt to operate the
Tungsten Grinder without the Grind-
ing Guide in place as severe cuts or
finger removal can occur.
FIG. 5
FIG. 6