Eastwood MP200i, Assembly And Operating Instructions Manual

Page: 28 / 40

28
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
Electrode Polarity Usage
E6010 DCEP This electrode works well for welding rusty, dirty, painted, or greasy steels.
E6011 DCEP This electrode is a general purpose rod used for carbon and galvanized steel. It is recommended for use when
deep penetration is necessary.
E6013 DCEP, DCEN This electrode is a general purpose rod used for welding carbon steel with poor-fitting joints. It is capable of
light penetration.
E7014 DCEP, DCEN This electrode can be used where a high deposition is necessary along with fast travel speed. It is capable of
light penetration.
E7018 DCEP This electrode is best for use with clean, bare steel and is suitable for moderate penetration.
Electrode/Amperage Chart
Electrode
Diameter Amperage Range
IN MM
6010 & 6011
3/32
1/8
5/32
3/16
2.4
3.2
4.0
4.8
6013
1/16
5/54
3/32
1/8
5/32
3/16
1.5
2.0
2.4
3.2
4.0
4.8
7014
3/32
1/8
5/32
2.4
3.2
4.0
7018
3/32
1/8
5/32
2.4
3.2
4.0
7024
3/32
1/8
5/32
2.4
3.2
4.0
Ni-Cl
3/32
1/8
5/32
3/16
2.4
3.2
4.0
4.8
308L
3/32
1/8
5/32
2.4
3.2
4.0
MIN
.
50 A 10
0 A
15
0 A
20
0 A
M
AX.
STICK WELDING OPERATION
ELECTRODE SELECTION
Before beginning welding with your Eastwood Elite AC/DC MP200i, you will need to purchase electrodes as these are a consumable item in the ARC welding
process. There are a variety of different types of rods available and they should be selected depending on the project at hand. The chart below is an overview
of some of the most popular electrodes.