To order parts and supplies: 800.343.9353 >> eastwood.com
7
HOT METAL AND TOOLS WILL BURN!
• Electric welding heats metal and tools to temperatures that will cause severe burns!
• Use protective, heat resistant gloves and clothing when using Eastwood or any other welding equipment.
Never touch welded work surface, MIG Gun tip or nozzle until they have completely cooled.
FLYING METAL CHIPS CAN CAUSE INJURY!
• Grinding and sanding will eject metal chips, dust, debris and sparks at high velocity. To prevent eye injury wear approved
safety glasses.
• Wear an OSHA-approved respirator when grinding or sanding.
• Read all manuals included with specific grinders, sanders or other power tools used before and after the welding process.
Be aware of all power tool safety warnings.
FIRST AID
• If exposed to excessive fumes move to an area with fresh air. Follow safety information on wire manufacturer’s Safety Data Sheet.
• For other injuries follow basic first aid techniques and call
SAFETY INFORMATION
CONNECTING THE WELDER TO A POWER SOURCE
The Eastwood MIG 90 Welder requires a dedicated 120 VAC, 20 AMP, 60HZ grounded outlet protected by a circuit breaker. The plug installed on the Welder is
a NEMA 5-15P and should be used with a NEMA 5-15R receptacle. If using an extension cord, use a minimum 12 AWG cord for up to 50 feet.
