Eastwood MIG 175 Assembly & Operating Instructions Download Page 2

2

 

Eastwood Technical Assistance: 800.544.5118  >>  techelp@eastwood.com

STATEMENT OF LIMITED WARRANTY

The Eastwood Company (hereinafter “Eastwood”) warrants to the end user (purchaser) of all new welding and cutting equipment (collectively called the “products”) that it 

will be free of defects in workmanship and material. This warranty is void if the equipment has been subjected to improper installation, improper care or abnormal operations.

WARRANTY PERIOD:

All warranty periods begin on the date of purchase from Eastwood. Warranty Periods are listed below, along with the products covered during those warranty periods:

3 Year Warranty on Material, Workmanship, and Defects:

• Eastwood MIG 175 Welder

Items not covered under this warranty: Contact tips, nozzles, wire, and ground clamp and cable.  

All other components are covered by the warranty and will be repaired or replaced at the discretion of Eastwood.

2 Years:

• All Welding Helmets.

CONDITIONS OF WARRANTY TO OBTAIN WARRANTY COVERAGE:

Purchaser must first contact Eastwood at 1-800-345-1178 for an RMA# before Eastwood will accept any welder returns.  

Final determination of warranty on welding and cutting equipment will be made by Eastwood.

WARRANTY REPAIR:

If Eastwood confirms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option  

to rectify the defect. At Eastwood’s request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood’s warranty.

FREIGHT COSTS:

The purchaser is responsible for shipment to and from Eastwood.

WARRANTY LIMITATIONS:

EASTWOOD WILL NOT ACCEPT RESPONSIBILITY OR LIABILITY FOR REPAIRS UNLESS MADE BY EASTWOOD. EASTWOOD’S LIABILITY UNDER THIS WARRANTY SHALL NOT 

EXCEED THE COST OF CORRECTING THE DEFECT OF THE EASTWOOD PRODUCT. EASTWOOD WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (SUCH 

AS LOSS OF BUSINESS, ETC.) CAUSED BY THE DEFECT OR THE TIME INVOLVED TO CORRECT THE DEFECT. THIS WRITTEN WARRANTY IS THE ONLY EXPRESS WARRANTY 

PROVIDED BY EASTWOOD WITH RESPECT TO ITS PRODUCTS. WARRANTIES IMPLIED BY LAW SUCH AS THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE 

DURATION OF THIS LIMITED WARRANTY FOR THE EQUIPMENT INVOLVED. THIS WARRANTY GIVES THE PURCHASER SPECIFIC LEGAL RIGHTS.  

THE PURCHASER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

SPEcIFIcATIONS

Output  

Amperage 

Range

30-175 A

Maximum  

Output No Load 

Voltage

30 V DC

Maximum

Input  

Amperage

22 Amp

Input  

Voltage

220 VAC

60 Hz

Rated  

Duty  

Cycle

30% 

@ 130 A

Wire 

Feed 

Rate

40-450 IPM

Welding

Wire

Spool

Sizes

4-8”

Weight

67 Lbs.

(25kg)

Overall  

Dimensions

24.4”

(620 mm) x

12.6”

(320 mm) x

17”

(430 mm)

Wire Type

& Diameter

Solid

0.023-0.030”

(0.6-0.8mm)

Stainless

0.023-0.030”

(0.6-0.8mm)

Flux Cored

0.030-0.035”

(0.8-0.9mm)

Spool Gun 

Wire Type

& Diameter

Wire Sizes

0.030-0.035” 

(0.8-0.9mm)

Summary of Contents for MIG 175

















Reviews: