HotCoat
®
LIMITED ONE YEAR WARRANTY
APPLIES TO HotCoat
®
POWER SUPPLY ONLY
The HotCoat
®
one year limited warranty applies only to the HotCoat
®
power supply. The HotCoat
®
power supply is warranted to be free from defects of workmanship and materials for the period of ONE
YEAR from the original date of purchase. During this one year period, if the unit should malfunction or
not operate, return the complete unit, freight prepaid, to the Eastwood Company. An R/A # must be
obtained from Customer Service prior to return. Upon receipt, The Eastwood Company will inspect the
power supply and, if the inspection reveals that the trouble is directly related to defective workmanship
or material, the Eastwood Company, at its option, will repair or replace the power supply unit without
charge. The remedy will consist of repair or replacement of the HotCoat
®
power supply only, at the
company’s sole discretion.
This warranty does not apply where:
– it is apparent that others have made repairs, or the power unit has been opened,
– the system has been abused or altered in any way,
– the system has not been operated in accordance with the instructions.
THE EASTWOOD COMPANY SHALL NOT BE LIABLE FOR ANY DAMAGE TO PROPERTY OR PERSONS
ARISING FROM THE USE OF THIS SYSTEM IN ANY WAY WHICH IS NOT DETAILED IN THE INCLUDED
INSTRUCTIONS. Failure to operate the system, as specified, will render any and all warranties, express
or implied, null and void. This warranty may not be applicable in certain states. It is suggested that you
consult your state authorities as to your specific rights. THERE ARE NO WARRANTIES, EXPRESS OR
IMPLIED, WHICH EXTEND BEYOND THOSE PROVIDED FOR HEREIN. This one year limited warranty
only applies to the original purchaser of the warranted product.
Powder Coating provides
a premium coating ideal
for many automotive,
marine, home, and garden
applications.
Eastwood’s
HotCoat
®
Powder Coating
System
is a breakthrough
refinishing system for the
home hobbyist providing
professional performance
at a fraction of the cost of
industrial equipment. The
cured finish resists most
chemicals, fuels, acids,
thinners, brake fluid, UV
light, and is much more
durable than liquid coatings (up to ten times). Powder coating is environmentally
friendly! It produces no toxic wastes and uses no solvents. The
Eastwood
HotCoat
®
PowderCoat System
allows you to coat a part and return it to service
in less than an hour! Now you can powder coat any metal part that can withstand
the 400˚F (204˚C) cure temperature utilizing an electric oven or our Infrared Light
Cure System.
Want To Start Your Own Powder Coating Business?
Log onto www.eastwood.com for a complete list of commercial powder coating equipment.
2
For technical assistance e-mail: [email protected]
D
ESCRIPTION
OF
P
RODUCT
DANGER: HIGH VOLTAGE! READ AND UNDERSTAND ALL DIRECTIONS
BEFORE PROCEEDING!
The power supply is a sealed unit and contains
no user serviceable parts! Contact with the emitter will result in an unpleasant
shock! To eliminate the shock hazard, touch the emitter to the ground clip after
each use.
(If you have a medical condition or pacemaker check with your
doctor before using.)
Danger: High Voltage!
Flammability Hazard
Powder coating dust, like common household dust, when confined and
suspended in air, poses a fire and potential explosion hazard if ignited. Good
housekeeping, adequate ventilation, dust control and isolation from potential
ignition sources is required! Sweep up unused powder
from the floor.
Do not vacuum unless the vacuum is
equipped with an explosion-proof motor. Never smoke
while powder coating. Do not apply powder coat near
any source of ignition, e.g. open flames, sparks, etc.
Use the same precautions that you would for liquid
solvent based coatings. DO NOT USE A GAS OVEN!
Contact with the emitter will
result in an unpleasant shock.
DO NOT TOUCH
THE EMITTER BEFORE
CONTACTING IT TO
THE GROUND CLIP!
CAUTION
Read and understand all instructions and precautions before proceeding.
This unit uses high voltage as well as powder which may become flammable
under certain circumstances. Eastwood shall not be held liable
for consequences due to deliberate or unintentional misuse of this product.
Safety Tip For Coating Internal Surfaces!
When coating internal areas such as boxes, tubing, etc., apply powder in
stages so that a dense dust cloud will not form. Coat small areas at a time and
allow cloud to dissipate before moving to next area. DO NOT TOUCH EMITTER
TO OBJECT! This will create a spark which may ignite dust cloud.
To order parts and supplies, call 1-800-345-1178 or www.eastwood.com
3
W
ARNINGS
