To order parts and supplies: 800.343.9353 >> eastwood.com
5
FIG. 1
FIG. 1
ASSEMBLY
PREPARING BLAST CABINET FOR ASSEMBLY
• With a capable helper, carefully set the Blast Cabinet
Assembly
[A]
on its back onto a secure working surface
with the round glove holes facing upward
(FIG 1)
.
REMOVE LIGHT FIXTURE FROM SHIPPING POSITION
• Unfasten the latches holding the Front Lid closed and
carefully open it
(FIG 2)
.
• Reach in and while supporting the Light Fixture, loosen the
six M6 screws holding it in place at the underside of the
roof of the Cabinet.
• Carefully withdraw the Light Fixture from the Blast Cabinet.
Set the Light Fixture aside in a secure location, along with
the screws removed, for installation later.
• Close and relatch the Front Lid to prevent accidental
damage during assembly.
FIG. 2
FIG. 2
The Eastwood Abrasive Media Blast Cabinet
consists of large, heavy metal components which
can cause potentially serious injuries if allowed
to drop. Avoid pinching hands while handling
parts and always wear thick, well-fitting work
gloves during assembly. The assistance of a
helper during assembly is necessary. The use of
safety shoes is recommended.
Light Fixture
Light Fixture