To order parts and supplies: 800.343.9353 >> eastwood.com
5
• Remove the protective plastic cap from the female fitting on the side of the Ram
[G]
and thread the male, Hydraulic Pump hose fitting into it
(FIG 7)
.
• Insert the (2) Bed Support Pins
[K]
through the selected pair of four available
height setting holes in the Frame side members
[A] (FIG 8)
.
• Feeding it from above at an angle, install the Table
[L]
between the Frame side
members and resting on the Bed Support Pins
[K] (FIG 9)
.
• Slide the Pump Handle
[D]
into the Pumping Lever of the Ram
[G] (FIG 9)
.
• The Arbor Plates
[M]
are placed as needed on top of the Table
[L]
support
the workpiece.
FIG. 7
FIG. 7
FIG. 8
FIG. 8
FIG. 9
FIG. 9
