16
Eastwood Technical Assistance: 800.343.9353 >> [email protected]
READOUT DISPLAY SETTING ADJUSTMENTS
NOTE:
To change one or more of the following Settings, all 4 must be scrolled through in sequence
even if no changes are desired. To initiate sequence of settings: Press “
STOP
” and “
C
” Keys.
1) Minimum Weight Value Sensitivity Setting
• The displayed weight value resolution is adjustable between, 1/8 oz., 1/4 oz. and 1/2 oz.
[5,10 or 15 grams]
(FIG 22)
.
• Press “FINE” Key to display actual imbalance amount.
• To toggle between the three sensitivity levels”, press “
b+
” or “
b-
” Keys.
Press “
a+
” Key to save chosen setting and progress to next setting.
2) Key Press “Beep Tone” Setting
This setting controls whether the a Beep tone is emitted every time a Key is pressed.
To do so:
• Press “
a+
” Key to display current function status.
Note that “
On
” indicates the “
Beep
” feature is “
on
”
(FIG 23)
.
• To toggle between “
On
” and “
Off
”, press “
b+
” or “
b-
” Keys.
Press “
a+
” Key to save chosen setting and progress to next setting.
3) LED Readout Display Brightness Setting
The LED Readout Brightness level default setting is 4 with a range of 1 through 8.
Right side displays brightness level. Increase or decrease brightness:
• Press “
a+
” Key to display current brightness
(FIG 24)
.
• To increase or decrease brightness, press “
b+
” or “
b-
” Keys.
Press “
a+
” Key to save chosen brightness setting and progress to next setting.
4) Inch to MM Wheel Dimension Setting
Most wheel dimensions are stated in Inches and the Balancer default is set to Inch.
If desired, it may be switched to MM. Increase or decrease brightness:
• Press “
a+
” Key to enter the setting
(FIG 25)
.
• To toggle between “
Inch
” and ”
MM
”, press “
b+
” or “
b-
” Keys.
Press “
a+
” Key to save chosen setting and exit settings sequence.
FIG. 22
FIG. 23
FIG. 24
FIG. 25
