Eastsign
7
5.2
、
PlacingPictureonthemachine
5.2.1
、
Paste a piece of leading paper (or cloth) about 1-1.5 meters long
andhavingthesamewidthwiththepicture(itisbettertousesame
material with the picture.) at each end of the picture to be
laminated. Then roll the picture on a paper tube with the picture
drawing outward. After this, put the paper tube into the roller for
supportingthepicture.
5.2.2
、
Lift up heating box, loose the positioning-wheel and pull up the
roller system for wiping liquid film. Paste the picture and paper-
tube on the roller for collecting picture together according to a
path,throughwhichthepicturepasses.Thenputdowntheroller
systemforwipingliquidfilm,andclampthepositioning-wheelat
twosides.
5.2.3
、
Move the liquid-film stoppers to the two ends of the picture, and
screwfirmlyasmallhandwheelattheliquid-filmstoppers.
5.2.4
、
Adjustthedamp-handwheel(seeFig.3)oftherollerforsupporting
thepicture,inordertoletthepicturestained.Thelaminatedfilm
willbeover-thicknessandwithoutdryingenoughifadampistoo
small.However,themotormaybedamagedifdampistoolarge.
5.2.5
、
TurntheDirectionSwitchofthecollectingrollerforpictureatits
upperposition“
F”tolettherollerforcollectingpicturerotatingin
clockwise.PresstheWork-State-SelectionSwitchofthecollecting
roller for picture, and turn the speed-adjusting button in
clockwisetoletthepicturestained
Notice:
Whenthepicturemountedonthemachine,thetwosidesofthe
picture shall be parallel to its moving direction; otherwise, the picture
maydeviatefromthesettinglineduringlaminating.
O
P
E
R
A
T
IO
N
GP
R
O
C
E
D
U
R
E
S
