time,theaxialfanisstillworkingtoreducethetemperatureinside
the heating-boxes and drying the liquid in the guiding paper (or
cloth).Notice:Aftertheheating-boxesstopwork,theaxialfanwill
stop work automatically after 2 minutes delayed. Please turn off
themainswitchaftertheaxialfanstopswork.
5.4.4
、
Take the picture from the machine: Lift up the heating-boxes,
depart the picture from the guiding paper (or cloth). Press the
Direction Switch of the roller for collecting picture (Fig.4) at
position“
R”. Turn the speed-adjusting button in clockwise to set
the 100%. Press the Work-State-Selection Switch of the roller for
collecting picture (Fig.4) in order to take the laminated picture
fromthemachine.Youcanalsotaketherollerforcollectingpicture
fromthemachinetorollthepictureontheworktable.
5.4.5
、
EmergencyButton:Inthecourseoflaminating,Ifthetemperature
isfoundtoohigh(thismayburnthepicture),andwithoutanytime
tochangethetemperaturesettingvalue,youcanliftupthedrying
boxesorpresstheEmergencyButtontoturnoffthemachine.
5.4.6
、
If it is found that the machine is with troubles, press the
emergencybutton(Fig.2)tocutoffpowersupply.
5.5
、
Servicesafterworking
5.5.1
、
Turnoffthepowersupply.
5.5.2
、
Retrieveliquidcollectedinthetray.
5.5.3
、
Cleanmachinecomponents:Cleanthewiping-rod,liquidstoppers
and the roller for coating the picture in time with wet cloth after
laminating. In order to facilitate the cleaning work, loose the
positioning handwheels (Fig.6), and lift up the wiping roller
system.Putthembackintheirplaceforusingthemachineatnext
time.
Notice:
If the machine is not used for a log time, empty out liquid from
thetankintotheoriginalcontainer,andwashthepipebetweentankand
valvetoavoidblockageduetosolidification.
Eastsign
9
O
P
E
R
A
T
IO
N
GP
R
O
C
E
D
U
R
E
S