EASTRON SDM630MCT-RJV / SDM630MCT-RJA User Manual V1.1
Address: No.1369 Chengnan Road, Jiaxing, Zhejiang, 314001, China.
Tel: 0086-573-83698881/83698882 Fax: 0086-573-83698883 Web: www.eastron.com.cn
- 8 -
does not roll over between bottom and top of list
2) Press
to confirm your selection
3) If an item flashes, then it can be adjusted by the buttons
and
. If not, there may
be a further layer.
4) Having selected an option from the current layer, press
to confirm your selection. The
SET indicator will appear.
5) Having completed a parameter setting, press
to return to a higher menu level. The
SET indicator will be removed and you will be able to use the buttons of
and
for further menu selection.
6) On completion of all setting-up, press
repeatedly until the measurement screen is
restored.
Number Entry Procedure
When setting up the unit, some screens require the entering of a number. In particular, on entry
to the setting up section, a password must be entered. Digits are set individually, from left to
right. The procedure is as follows:
1) The current digit to be set flashes and is set using the
and
buttons
2) Press
to confirm each digit setting. The SET indicator appears after the last digit has
been set.
3) After setting the last digit, press
to exit the number setting routine. The SET indicator
will be removed.
Change password
1
Use the
and
to choose
the change password option
