10
EASTRON SDM530C User Manual
06-2018 V1.0
2018 EASTRON Electronic. All Rights Reserved. www.eastron.com.cn
This meter provides a function to set Password.
Example shows the password is 1000.
6
Use
and
to enter the new
password. The range is from 0001 to 9999.
Keep press
for 3s to confirm the
selection.
7
Keep pressing
for 3 seconds, then use
to check the Alarm correlation
information: Alarm object, Alarm value, relay
status.
use
to check the Alarm object: U1, U2,
U3, UNav, U12, U23, U31, UUav, I1, I2, I3, Iav, In,
F, P1, P2, P3, P, q1, q2, q3, q, s1, s2, s3, s
(Note: not programmable) *
use
to check the Alarm value.
(Note: not programmable) *
Keep pressing
for 3 second, to set relay
status. Off means relay open, ON means relay
close.
(note:
This option only can be set when the
alarm occurs and the relay opens. If you want to
solve this alarm, use this option to set relay
status “on”. Therefore, please make sure the
alarm object is troubleshooted before you do
this.
Keep pressing button
to exit the set-up mold.
* T
he alarm object and alarm value can only be programmed via RS485 command. For details,
please refer to the SDM530C modbus protocol.