EASTONTECH FEK-06M, Operation Instruction Manual, Page: 7 / 8

Quality assurance
Our guarantees that all products are strictly performed the quality inspection before
leaving the factory, the company will provide you with the perfect after-sale security
services in accordance with the regulations of three guarantees for products. The
company will provide you with the quality assurance of 12 months under normal service
conditions from the date of purchase, the followings do not belong to the warranty
scope:
- Application of the non-provisions of FEK-06M.
- Inappropriate workplace
- Inappropriate application and application beyond the provisions of the operating
instructions.
- Reformation of FEK-06M without authorization
- Continuous use of FEK-06M under the failure situation
- Continuous use after crimping more than 500,000 times. It shall be maintained by the
manufacturer after crimping more than 500,000 times.
- Inappropriate die installation/repair
- No use of original crimping die sets and original spare parts.
(1) Put the stripped insulated conductor into the terminal
(2) Put the terminal in the corresponding crimping die sets, then step down the foot air
valve, release the air valve after the completion of the crimping.
(3) When replacing the crimping die sets, shut off the air source firstly for avoiding the
risk caused by improper operation. Then unscrew the screw on the protection cover.
(4) Remove the protection cover.
(5) Replace the required crimping dies on the fixture, then install the protection cover
again.
Operation Instruction for FEK-06M
-The large metal parts or materials cannot be fed into the crimping die sets
for avoiding to damaging the crimping die sets.
-Based on security reasons, FEK-06M is prohibited to transform and the
part is prohibited to replace and change without authorization.
5
① ② ③ ④ ⑤