8
Form E-551
Replacing the Sharpening Wheels
1.
Using a clean dry cloth saturated with alcohol clean the mounting surfaces of the sharpening housing.
2.
Apply a few drops of “loctite 222 MS” on the end of screws which hold the sharpening wheels.
3.
Install the new sharpening wheels.
4.
Return the screws to hold the grinding wheels.
5.
Return the rotating tool head and ensure when you put back the tool head on the shaft the pin on the tool
head should be aligned to the key way on the shaft (ref image).
6.
Raise the tool head after alignment with keyway to upper position until it stops.
7.
Tighten the screw which holds the rotating tool head housing to the shaft.
