3.
Standby Status
In order to conserve battery power, the system will revert to standby status if there is no key press
within 10 seconds. Standby status is indicated by two short beeps.
4.
Automatic Re-lock
The motor turns to open with a valid code entry, rotate the keypad to the right to open. The motor
automatically relocks after 6 seconds, then rotate the keypad to the left to close the lock.
5.
Low Battery Alert
a.
Repeated beeping (8 beeps) during an unlock operation indicates that the battery is low and needs
immediate replacement.
b.
Manufacturer recommends the use of 9-Volt standard alkaline battery (Duracell or Energizer
brands are recommended) replaced annually.
6.
Single and Dual User Mode
a.
Single Mode:
Open lock with one (1) code.
b.
Dual Mode:
Open lock with two (2) codes (manager and user code).
7.
Time Delay and Time Window
a.
Time Delay:
A time period of waiting for the lock to open. The maximum Time Delay is forty
(40) minutes.
b.
Time Window
: A time period for entering the code(s) to open lock after Time Delay. The
maximum Time Window is twenty (20) minutes.
USER OPERATING INSTRUCTIONS
1.
ALWAYS PERFORM OPERATIONS WITH THE ENTRYPAD UNLOCK AND
THE SAFE DOOR OPEN.
2.
Before closing the door, make sure all of the changes are correct.
3.
Do not set the user code to six “0” or other simple code like “1-2-3-4-5-6” that is
easy to guess.
4.
Do remember to change the default code after installation.
5.
Do not make the code you want to set include your personal data like birthday or
other data that could be derived from having knowledge about you.
QUICK START
