10.
Delete User
a.
Enter the manager code and hold down last digit of code until one beep sounds, followed by two
beeps.
b.
Press button “3”, one beep will sound, prompting the entry of the user ID.
c.
Enter a user ID (2~9). For example, press 2 to delete user ID 2, one beep will sound, indicating
the deleting user is successful.
d.
Enter the deleted user code to make sure the code is deleted.
Note:
In Dual User Mode, when super code deletes manager code, the manager code and user code will be
both deleted and single user mode is set.
11.
Enable Dual User Mode (Manager & User Code to Unlock)
a.
Enter the super code and hold down last digit of code until two beeps sounds.
b.
Press button “8” to set controller to dual user mode.
Note:
a.
Make sure that the manager and user codes are both set and enabled before setting Dual User
Mode.
b.
After setting Dual User Mode, manager code cannot set functions of user code, such as disabling
or deleting.
c.
In Dual User Mode, when super code deletes codes, the manager code and user code will be both
deleted and single user mode is set.
d.
In Dual User Mode, super code disables / enables manager code and user code at the same time.
12.
Disable Dual User Mode
a.
Enter the super code and hold down last digit of code until two beeps sounds.
b.
Press button “0” to set controller to single user mode.
13.
Set / Change Time Delay & Time Window Mode
a.
Enter the super code and hold down last digit of code until two beeps sounds.
b.
Press button “9”, one beep will sound, prompting the entry of the time delay and time window
parameter.
c.
Enter a six (6) digit number in the range of 001001 – 040020. The first 3 digits are for the Time
Delay and the second 3 digits are for the Time Window. The maximum Time Delay is forty (40)
minutes, and the maximum Time Window is twenty (20) minutes. For example, to set a fifteen
(15) minute Time Delay and a three (3) minute Time Window, enter 015003.
Note:
a.
Super Code is Time Delay overridden. If enter the super code, the controller will always unlock
immediately.
b.
Set Time Delay and Time Window parameter to 000yyy to cancel time delay.
OPERATE ENTRY PAD WITHOUT TIME DELAY &TIME WINDOW
1.
Single User Mode
