8 Safety
Explanation of Symbols
Caution sign or Safety Alert symbol. Indicates caution, be alert, Your safety
is involved. Knowledge of safe operation is required.
Ground symbol. Indicates ground. Use Class-3 (lower than 1000) cable to
ground to earth. Incomplete grounding may lead to electrical shock.
Electrical shock hazard. Indicates possible danger of electrical shock. Only
a trained electrician should be allowed to open or work in the electrical
panel or box.
Caution: Hot Surface or High temperature hazard. Do not touch or place
hands close to the heating source to avoid burns. Proceed with any
maintenance only when the temperature of the heater or other heat source
has cooled down to room temperature.
Caution: Moving parts can crush hand. Keep hands and fingers away from
moving parts.
Caution: Pinch point or entanglement. Keep hands and fingers away from
moving parts.
Caution: Sharp Blade could cut fingers or hand. Keep hands and fingers
away.
Caution: Eye protection is required when operating the Semi-Automatic
Strapping Machine. Always wear safety glasses when operating this
machine.
Moisture hazard. Keep equipment dry. This equipment is designed for
indoor operation in a typical clean, dry factory environment, protected from
rain and moisture. Do not operate the machine in any extremely wet or oily
environment that may exceed operating specifications.
Refer to this User Guide for important safety information and operating
instructions to set up, operate, adjust, and maintain this Semi-Automatic
Strapping Machine.
Summary of Contents for EXS-100
