HD-TVI DVR User Manual
29
4.6.5 NAT
①
Go to Main Menu
Setup
Network
NAT interface. Refer to Fig 4-28.
Fig 4-28 Network Configuration-NAT
②
Enable NAT and input the NAT Server (The default NAT Server is
www.autonat.com
)
③
Click “Apply” to save the settings.
4.6.6 Other Settings
If your DVR is set to use PPPoE as its default network connection, you may set up DDNS to
be used in connection. The setting steps are as follows:
①
Enable DDNS server.
②
Select DDNS server.
③
Enter user name, password and host domain name of the registered website.
④
Click “Test” button to test the effectiveness of the relevant information.
⑤
Click “Apply” button to save the setting.
Fig 4-29 Network Configuration-Other Settings
Enable UPnP:
Select UPnP here and then enable UPnP function in your router. Therefore,
there is no need for you to forward LAN IP address and port in the router in connection of
internet. After that, you can check the WAN IP address in the router.