microBrute DRSSTC Tesla Coil Kit
November 2019, Rev 5
− 28 −
Copyright © 2011, Eastern Voltage Research, LLC
microBrute DRSSTC Instruction Manual
102. Using the included 12 AWG wire, wind the primary coil as shown in the
figure above. The primary coil can then be secured in place using masking or
electrical tape (not supplied), or two-part epoxy (not supplied).
103. Assemble the primary and secondary coils using the included centering ring.
Use 5-minute epoxy (not supplied) to permanently affix in place.
