Eastern Jungle Gym Classic tire, Owner'S Instruction Manual

Page: 13 / 19

Step #5- Tire Swing Assembly Classic Tire
12
Remove plastic from the chains. Unscrew the lock nut from each of the
swing chains and remove the metal washer. Place the tire eye bolts through
the top of the tire, placing one eye bolt into each of the 3 pre-drilled holes.
Remove all parts from the box and place on the ground. Inspect the rubber
tire and make sure that the side with 3 evenly spaced holes is facing up.
The eye bolts will need to be secured from the inside of the tire secure it
with the lock nut that was previously removed. Tighten the lock nut with a
wrench until snug. Repeat this step for the remaining two eye bolts.
Your tire swing is now complete1 Attach the tire swing to your backyard
swing set using the hardware of your choice.