Eastar EK-620S, Owner'S Manual

Page: 7 / 48

●
05
9. Fill in
When there is a rhythm playing, press [FILL IN] to insert a 1-2 bar interlude in the rhythm,
and then switch to the normal rhythm.
If you keep pressing, the inserted interlude will be played repeatedly.
If there is no rhythm playing. Press [FILL IN] to start the rhythm with an interlude.
10. Sync
When first pressing in the accompaniment keyboard area, if you press [SYNC] button,
automatic rhythm or accompaniment will start immediately. When there is a rhythm, if you
press this button, the rhythm will stop and enter the sync state.
Press [FILL IN] in the synchronized state to start the accompaniment from the interlude.
11. Bass
During accompaniment, press [BASS] button to change the chord tone. Each time you
press it, it changes a chord tone, seven different chord tones in total.
●
Intro/Ending Prelude: Press the [INTRO/ENDING] button to start a prelude and
automatically play the rhythm.
●
Ending: When the rhythm is activated. press the [INTRO/ENDING] to automatically
stop playing the current rhythm after playing a prelude.
12. Record and playback
●
Record: Press [RECORD] button to enter the recording state. Then you can play the
keys freely and the notes will be stored. When the notes are full recorded or press
[RECORD] button again, the recording ends. The recording function can store up to 45
notes.
●
Playback: After recording, press [PLAY] button to automatically play the previously
recorded melody, and press [PLAY] button again to stop.
13. Rhythm programming
Press [PROGRAM] button to enter the programming state. Press each percussion to
compose a set of rhythms. Up to 32 can be programmed.
After fully programming or press [PROGRAM] again, the programming will automatically
end.
14. Other control functions
●
Sustain: Automatic extension of the end of a note played. Press [SUSTAIN] button to
turn on/off the sustain function.
●
Vibrato: The pitch of a note quivers in a small range. Press [VIBRATO] button to turn
on/off the vibrato function.
15. Percussion
Press [PERCUSSION] button, and the whole keyboard will be transformed into a
percussion instrument, and each key corresponds to a percussion instrument.
16. Metronome
●
Press [METRONOME] button to start the metronome and make a beep sound, and the
beat effect will be added when playing.
●
The beat of each continuous press is: 1/4 beat; 2/4 beat
；
3/4 beat; 4/4 beat.
●
After each press to start the beat, press [METRONOME] again to stop, and press again to
start the next beat.
17. Demos
● Demo one:
Pressing [DEMO ONE] button to Single tune repeat. Pressing again or
[START/STOP] button to exit.