LPG cylinder connection
ASSEMBLY INSTRUCTION
(LPG cylinder)
•
Inspect the entirety of the gasket for any sign of damage or erosion.
Position the LPG cylinder in the repit and secure the unit using the
retainer bolt.
•
ATTENTION:
Ensure the valve on the re pit and LPG cylinder are set
to the “OFF” position.
•
Remove any protective caps on the LPG cylinder. Align the gas lines to
the LPG cylinder nozzle. Fasten the connection with a coupler
.
•
NOTE:
Be mindful of cross threating. To avoid this, do not overtighten
screws and connections. The gas line should be tight enough without any
signs of wiggling or gaps between connections.
•
Inspect the gas line and perform a leak test prior to each use (see page 18).
Remember
to tighten!
1
3
EASTOAK.COM
FIRE PIT TABLE
Summary of Contents for GFT22001
