Ultra Compact Meter Controlled Water
Softener
Image of control head
Digital display
Regeneration
controller (1)
Time of day controller
(2)
Regeneration dosage
control (4)
Cubic meter capacity
controller (5)
Control head lock (for our
engineers use only) (3)
Setting the time of day
: Press the time controller (2) until the desired hour appears. Release. There
is no minute setting on this softener. Elapsed minutes will reset to zero when the hour is changed.
Regenerant dosage:
Press the dosage control button (4) and set to 0.65. Release
Capacity setting:
Use the capacity controller (5) to set to 0.65. Release
To programme your Ultra Compact Water Softener
Immediate manual
regeneration:
Press and hold the controller (1)
for three seconds. This will
initiate an immediate
regeneration. The display will
show a cascading symbol as it
cycles to backwash. The unit will
proceed through a complete
regeneration.
Delayed regeneration:
If you need to set up a delayed regeneration, follow these steps.
Press and release the regeneration controller (1) .
The unit will regenerate at the next time of regeneration (0200 am).
Repeat procedure to disable the Delayed Regeneration. The Regeneration dot will blink when
the delayed regeneration is on.
QUICK SET UP GUIDE
TAKE CARE TO ENSURE THAT THE DOSAGE CONTROL AND THE CAPACITY CONTROL (4 AND 5) ARE
NOT INADVERTENTLY ALTERED OR CHANGED ACCIDENTALLY
This row of indicators will tell
you how much softening
capacity the softener has
before its next regeneration.
There is no adjustment
required.
6
