Easson ES-9Q, Operation Manual, Page: 32 / 56

- 26 -
Inclined compensation
8) Inclined compensation
operation procedure.
it should use this inclined compensation function in priority facilitating to the followed
coordinate into specimen's working coordinate. Before measuring a new work piece,
purpose to overlap certain edge line with x- or y-axis, and convert the instrument
function allows operator to rotate the coordinate system to a specific angle in the
contour or not right angle between x- & y-axis, the display's coordinate compensation
and improve the measuring speed and accuracy. When the specimen has irregular
major function of this compensation is to help operator set up the specimen quickly
specimen; this process is called the coordinate inclined compensation. The
Rotate the x-axis or y-axis and move the coordinate to overlap one side of the
Operation steps: select up point A & B (can increase up to 9 points) at any one straight
line of work specimen to make the datum line.
)
a
Press in th edisplay.
Display will show &request to
input the line feature.
POINT 1
)
c
Move center line to point B and press .
)
b
Move center line to point A and press .
B
A
Polar
XY
Store Recall R/D Print
Enter
Q
FINISH
POINT 1
Polar
XY
Store Recall R/D Print
Enter
Q
FINISH
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
POINT 1
0.000
0.000
Enter
Enter Polar
XY
Store Recall R/D Print
Enter
Q FINISH
POINT 2 30.642
-4.089
Enter
Enter