Easson ES-9Q, Operation Manual, Page: 21 / 56

- 15 -
2 points to construct a line function
2) Two points to construct a line function
1. Press the key to enter into
two points to construct a line function
ENT PT.1
message window displays
requesting enter the point no. 1
2. locate the cross hair center at the first point on the circle, press to enter the point no. 1
ENT PT.2
message window displays
requesting enter the point no. 2
3. locate the cross hair center at the second point on the circle, press to enter the point no. 2
Purpose
: On the instrument, pick up points
(from 2 up to 9 points) from the edge
of work piece to associate a line.
A
B
User can select up to 9 points associating the datum line; if less than nine points picked,
press to close the calculation during the measuring process.
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
ENT PT.1
A
Enter
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
ENT PT.1 28.500
8.560
B
Enter
Polar
XY
Store
Recall
R/D Print
Enter
Q
FINISH
ENT PT.2
43.549
5.374
Enter
Enter
FINISH