Easson ES-9Q, Operation Manual, Page: 23 / 56

- 17 -
3) point measurement function
purpose: to measurement a point and store the
measured point into the ES-9Q's
memory.
point measurement function
1. Press the key to enter into
two points to construct a line function
ENT PT
message window displays
requesting enter the point
3. After operator viewed the point feature's parameters, operator can store this point feature into the
memory of ES-9Q as per following procedure.
press key to store the feature into the memory
ES-9Q asking the feature memory
location to be stored.
2. located the cross hair center to the measured point, press to enter the point.
X coordinate
Y coordinate
There are 100 feature memory available in ES-9Q, they are feature 0-99 respectively, in this example, we
are going to store this point parameters as feature 07, procedure are as follows
enter the feature memory
location. then the point parameters
are store into memory location
as feature 07.
A
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
RESULT
8.560
5.420
A
Enter
Store
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
RESULT
8.560
5.420
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
SEL 0-99
8.560
5.420
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
ENT PT.
Store
Polar
XY
Store Recall R/D Print
Enter
Q FINISH
SEL 0-99
8.560
5.420
Enter
Enter